"This
is the third time that I have attended these seminars and all
have been excellent. These classes speed up the learning
process, the instructor is very knowledgeable, and comments
from others in the class can also be helpful."
Brett Goll [Dallas 2002-2003 Digitizing, Editing
& Analysis seminar]
"Today's
Sitework 98 seminar was very informative, and the steps to use
the program for earthwork computations were explained very clearly."
Matthew Armstrong [Dallas 2002-2003 Digitizing,
Editing & Analysis seminar]
"This
seminar is an excellent learning experience and I would suggest
it to any AGTEK user." Anonymous [Dallas
2002-2003 Digitizing, Editing & Analysis seminar]
"Awesome
tips and tricks." J. P. Morgan [Denver
2002-2003 CAD & Survey Data seminars]
"I
should have signed up for both days."
Robert Levstick [Denver 2002-2003
Digitizing, Editing & Analysis seminar]
"The
information was well organized and well presented. The
seminar followed the handbook well and the handbook can be referenced
for future answers to complex questions."
Sean Hartness
[Seattle 2002-2003 CAD & Survey Data seminars]
"Very
helpful." Nathaniel Larson [Seattle
2002-2003 CAD & Survey Data seminars]
"Having
had a very limited exposure to AGTEK prior to the course, both
seminars were of great value to me. Your thorough knowledge
of the system combined with your personable personality helped
with the learning process. The seminar workbooks are laid
out in such a way that they will be vital tools in shortening
my learning curve. I would highly recommend this course
to anyone learning this system. Thanks Michael!"
Andrew Bird [Seattle 2002-2003 Digitizing,
Editing & Analysis and CAD & Survey Data seminars]
"I
learned techniques at this seminar that will greatly increase
my productivity and the accuracy of my takeoffs."
Tim Cote [Boston 2002-2003 CAD & Survey Data
seminar]
"I
would like to see separate basic and advanced classes, but overall
it was a valuable experience." Rob Pontau
[Boston 2002-2003 CAD & Survey Data seminar]
"Great
job, very pertinent information. You should write AGTEK's
manuals." Andrew F. Crowshaw [Boston
2002-2003 Digitizing, Editing & Analysis seminar]
"Excellent,
well-organized presentation." Mark Beauchamp
[Boston 2002-2003 Digitizing, Editing & Analysis seminar]
"As
a new user of Sitework 98, I found the seminar very interesting
and informative. The shortcuts will be useful and save
me time. The instructor was extremely informative and
knowledgeable." Anonymous
[Boston 2002-2003 Digitizing, Editing & Analysis seminar]
"Good
to learn some shortcuts and time-saving techniques."
Andrew Borggaard
[Boston 2002-2003 Digitizing, Editing & Analysis seminar]
"I
learned new things (and I have been using AGTEK for 15 years)."
Anonymous [Boston
2002-2003 Digitizing, Editing & Analysis seminar]
"The
seminar was full of useful information--actually, it contained
more information than I expected. I thought that I knew
pretty much all there was to know about manipulating CAD data,
but the 2D to 3D conversion techniques as well as the coordinate
translation techniques were especially useful. I also
thought that the staking techniques were useful. I will
use this information quite a bit." Anonymous
[Columbus 2002-2003 CAD & Survey Data seminar]
"The
presentation contained many useful tricks, and it explained
well some features of Sitework 98 that I was previously unfamiliar
with, such as the Strata Layers feature. Some of the topics
were a little basic, but the overall presentation gave me a
lot of ideas." Anonymous
[Columbus 2002-2003 Digitizing, Editing & Analysis seminar]
"The
first day was a great overview of the basics of digitizing with
some very helpful shortcuts to make the application [Earthwork
3D] much smoother to operate. The second day was a very,
very excellent presentation of what is applicable to my work
as a civil contractor. Overall, excellent. These
seminars are a must if you have purchased the AGTEK software."
Kevin L. Foshee
[Atlanta 2002-2003 Digitizing, Editing & Analysis and CAD &
Survey Data seminars]
"Michael
Cope's attention to detail and dedication to teaching all aspects
of the program made the session well-worth the cost. The
training will pay for itself in one accurate job."
Tom Duke [Atlanta 2002-2003 Digitizing, Editing
& Analysis seminar]
"The
class today was much more informative for me personally because
it dealt more with questions, answers, problem situations, etc."
Anonymous [Philadelphia
2002-2003 CAD & Survey Data seminar]
"The
content and time was perfect. It will motivate me to start
utilizing AutoCAD LT." Anonymous
[Philadelphia 2002-2003 CAD & Survey Data seminar]
"I
wish this class was available when the program [Earthwork 3D]
was first released because this was an excellent course for
beginners." Anonymous
[Philadelphia 2002-2003 Digitizing, Editing & Analysis seminar]
"Overall,
this class was excellent. The instructor is very knowledgeable
and organized. The handouts are very good."
David A. Jordan
[Philadelphia 2002-2003 Digitizing, Editing & Analysis seminar]
"Very
well presented and very informative."
Matthew Mitcham [Philadelphia 2002-2003 Digitizing,
Editing & Analysis seminar]
"I
am totally impressed with the knowledge of the instructor and
the depth of Sitework 98. I feel confident that this seminar
will take me to a new level of ability with this software."
Michael Dickson [Charlotte 2002-2003 Digitizing,
Editing & Analysis seminar]
"Today's
session was very helpful. Michael Cope was very organized
and well-oriented with his training procedures. Thanks
again for offering this seminar." Brad
Harris [Charlotte 2002-2003 Digitizing, Editing & Analysis seminar]
"I
enjoyed it very much, and I learned a lot of useful techniques
that will save me a lot of time in the future. Thanks!"
Anonymous [Charlotte 2002-2003 Digitizing,
Editing & Analysis seminar]
"Great
seminar--I would recommend taking this class after six months
to a year of experience. It shows time saving methods,
plus it demonstrates how powerful this program really is."
Jeff Guill [Charlotte
2002-2003 Digitizing, Editing & Analysis seminar]
"All
the information was new to me, but it was explained in a very
understandable way. I can use everything I learned."
Anonymous [Charlotte
2002-2003 CAD & Survey Data seminar]
"This
class was the most valuable tool for learning AGTEK that I have
experienced." Laura Farley
[Baltimore 2002-2003 Digitizing, Editing & Analysis seminar]
"The
length and content was good for new users of Earthwork 3D, though
it was also very informative for more experienced users like
myself." Anonymous
[Baltimore 2002-2003 Digitizing, Editing & Analysis seminar]
"Overall,
the course was very informative. I am an experienced user
of Sitework 98, Materials 2000 and Highway Sections. The
course helped me realize alternate methods to analyze data in
AGTEK." Michael Stuppy
[Baltimore 2002-2003 Digitizing, Editing & Analysis seminar]
"Excellent
seminar with practical information that I will be able to put
to very profitable use." Eric Karnes
[Raleigh 2002-2003 Digitizing, Editing & Analysis seminar]
"This
was my second seminar with Michael Cope on Sitework 98.
The first time, I had only been using AGTEK for 3 or 4 months,
but I learned so much and I really used that knowledge when
I returned to work. I also repeatedly used the seminar
handbook to direct me through the steps. I returned this
time to refresh the operations and correct any bad habits that
I had developed. Every time I attend, I learn more and
more." Joe Miller [Raleigh 2002-2003
Digitizing, Editing & Analysis seminar]
"This
information will make my job easier and be a great asset to
our organization. Thank you."
Christy Britt [Raleigh 2002-2003
Digitizing, Editing & Analysis seminar]
"Very
informative, I believe this seminar will help me to be a lot
more productive." Eric Karnes [Raleigh
2002-2003 CAD & Survey Data seminar]
"This
seminar exceeded my expectations . . . we learned a lot"
Andon Calhoun
[Orlando 2002-2003 Digitizing, Editing & Analysis seminar]
"This
seminar was very informative. We were unaware of a lot
of the features we had access to and we are looking forward
to using them in the near future." Paul
Arcella [Orlando 2002-2003 CAD & Survey Data seminar]
"Mike,
once again you have impressed upon me the usefulness of this
program. Thanks a lot, Tom." Thomas
R. Hurst, II [Chicago 2002-2003 Digitizing, Editing & Analysis
seminar]
"It
was very helpful finding in one day the secrets that the
Pros find through years of experience"
Todd Peterson [Chicago 2002-2003 Digitizing,
Editing & Analysis seminar]
"Good
seminar. There was a ton of material covered and I learned
a lot." Daniel Giupido
[Chicago 2002-2003 Digitizing, Editing & Analysis seminar]
"Mike,
thanks for all of the information . . . I hope to put all this
info to work. Thanks again, Tom."
Thomas R. Hurst, II [Chicago 2002-2003 CAD &
Survey Data seminar]
